Offset-Perf

• Microperf Perforator Tape 50", center, paper - 6 m roll

  Normal delivery time: 2 day(s)

  

  Product no.: 9662

  Installation:
  The back pressure cylinder is cleaned of oil and grease.
  Offset plates are produced with auxiliary points for perforating band positioning.
  An impression is taken on the impression cylinder.
  A suitable piece of perforating tape is cut off.
  The protective paper for the adhesive film of the perforating tape is removed and the perforating tape is placed on the impression cylinder in the correct position for the auxiliary points and stuck in place.
  Apply the tape provided over the perforating tape.
  
  If the perforation is too strong, apply one or more layers of tape over the perforating tape. If the perforation is too weak, apply a strip of tesafix adhesive film under the perforation tape.

  

  • 107,00  € 
    ex. VAT and environmental contribution fee

  incl. VAT
• Offset-Perf center, cardboard - 1,8 m roll

  Normal delivery time: 10 day(s)

  

  Product no.: 3672

  Installation:
  The back pressure cylinder is cleaned of oil and grease.
  Offset plates are produced with auxiliary points for perforating band positioning.
  An impression is taken on the impression cylinder.
  A suitable piece of perforating tape is cut off.
  The protective paper for the perforating tape adhesive is removed and the perforating tape is placed on the impression cylinder in the correct position for the auxiliary points and stuck in place.
  The tape provided is applied over the perforating tape.
  
  If the perforation is too strong, apply one or more layers of tape over the perforating tape. If the perforation is too weak, apply a strip of tesafix adhesive film under the perforation tape
  
  Size guide:
  3" = Gap 0.8 mm - Length of insert 7.7 mm
  6" = Gap 0.8 mm - Length of insert 3.53 mm
  8" = Gap 0.8 mm - Length of insert 2.48 mm
  12" = Gap 0.7 mm - Length of insert 1.42 mm
  16" = Gap 0.6 mm - Length of insert 0.90 mm

  

  • 21,00  € 
    ex. VAT and environmental contribution fee

  

  incl. VAT
• Offset-Perf center, paper - 1,8 m roll

  Normal delivery time: 10 day(s)

  

  Product no.: 3667

  Installation:
  The back pressure cylinder is cleaned of oil and grease.
  Offset plates are produced with auxiliary points for perforating band positioning.
  An impression is taken on the impression cylinder.
  A suitable piece of perforating tape is cut off.
  The protective paper for the perforating tape adhesive is removed and the perforating tape is placed on the impression cylinder in the correct position for the auxiliary points and stuck in place.
  The tape provided is applied over the perforating tape.
  
  If the perforation is too strong, apply one or more layers of tape over the perforating tape. If the perforation is too weak, apply a strip of tesafix adhesive film under the perforation tape
  
  Size guide:
  3" = Gap 0.8 mm - Length of insert 7.7 mm
  6" = Gap 0.8 mm - Length of insert 3.53 mm
  8" = Gap 0.8 mm - Length of insert 2.48 mm
  12" = Gap 0.7 mm - Length of insert 1.42 mm
  16" = Gap 0.6 mm - Length of insert 0.90 mm

  

  • 21,00  € 
    ex. VAT and environmental contribution fee

  

  incl. VAT
• Offset-Perf, carton - 1,8 m roll

  Normal delivery time: 10 day(s)

  

  Product no.: 3683

  Installation:
  The back pressure cylinder is cleaned of oil and grease.
  Offset plates are produced with auxiliary points for perforating band positioning.
  An impression is taken on the impression cylinder.
  A suitable piece of perforating tape is cut off.
  The protective paper for the perforating tape adhesive is removed and the perforating tape is placed on the impression cylinder in the correct position for the auxiliary points and stuck in place.
  The tape provided is applied over the perforating tape.
  
  If the perforation is too strong, apply one or more layers of tape over the perforating tape. If the perforation is too weak, apply a strip of tesafix adhesive film under the perforation tape
  
  Size guide:
  3" = Gap 0.8 mm - Length of insert 7.7 mm
  6" = Gap 0.8 mm - Length of insert 3.53 mm
  8" = Gap 0.8 mm - Length of insert 2.48 mm
  12" = Gap 0.7 mm - Length of insert 1.42 mm
  16" = Gap 0.6 mm - Length of insert 0.90 mm

  

  • 28,00  € 
    ex. VAT and environmental contribution fee

  

  incl. VAT
• Offset-Perf, paper - 1,8 m roll

  Normal delivery time: 10 day(s)

  

  Product no.: 3677

  Installation:
  The back pressure cylinder is cleaned of oil and grease.
  Offset plates are produced with auxiliary points for perforating band positioning.
  An impression is taken on the impression cylinder.
  A suitable piece of perforating tape is cut off.
  The protective paper for the perforating tape adhesive is removed and the perforating tape is placed on the impression cylinder in the correct position for the auxiliary points and stuck in place.
  The tape provided is applied over the perforating tape.
  
  If the perforation is too strong, apply one or more layers of tape over the perforating tape. If the perforation is too weak, apply a strip of tesafix adhesive film under the perforation tape
  
  Size guide:
  3" = Gap 0.8 mm - Length of insert 7.7 mm
  6" = Gap 0.8 mm - Length of insert 3.53 mm
  8" = Gap 0.8 mm - Length of insert 2.48 mm
  12" = Gap 0.7 mm - Length of insert 1.42 mm
  16" = Gap 0.6 mm - Length of insert 0.90 mm

  

  • 28,00  € 
    ex. VAT and environmental contribution fee

  

  incl. VAT